Simple and effective pressure control
The Static Pressure Control is a fully programmable controller that provides extensive flexibility for your curtain or awning control needs. The SPC-2 automatically controls the pressure in a room by operating a curtain machine according to your programmed settings.
How it works
- When the pressure is within the idle band, the SPC-2 maintains the curtain position.
- When the pressure rises above the idle band, the SPC-2 opens the curtain for the open on duration and then pauses for the open off duration.
- After each off duration, the SPC-2 checks the pressure and then either opens or closes the curtain, depending on the pressure.
The Static Pressure Control is ideal for any building where static pressure is important.
Features:
- Automatic pressure-based control
- Programmable On and Off durations for the open and close relays
1 to 900 seconds (up to 15 minutes) - Programmable Set point and Idle band
0.010 to 0.250 inWC - Programmable high and low pressure alarms
- Two curtain relays (one open, one close)
- Differential pressure sensor
- Alarm relay (for external alarm system)
- Four-button keypad
- Four-digit LED display
- Programming and status LEDs
- Manual override and test modes
- Power-failure settings protection
- NEMA 4X enclosures (Corrosion-resistant, water-resistant, and fire-retardant)
Control enclosure | Sensor enclosure - cCSAus approval
- 2 year warranty
