3/4 HP Flint & Walling Booster Pump
| Inlet Size – Pumps | 3/4 in NPT |
| Outlet Size – Pumps | 3/4 in NPT |
| Height | 9 in |
| Width | 6 1/2 in |
| Manufacturers Warranty Length | 1 yr |
| Length | 23 7/8 in |
| Max. Dia. Solids | clear water |
| Overall Length | 23.88 in |
| Overall Height | 9 in |
| Overall Width | 6.5 in |
| Compatible Intake Pipe Size | 3/4 in |
| Intake Size | 3/4 in |
| Solid Diameter (Maximum) | 0 in |
| HP – Pumps | 3/4 hp |
| Voltage – Pumps | 120/240V AC |
| Phase – Pumps | 1 |
| Number of Stages – Pumps | 12 |
| Max. Pressure – Pumps | 158 psi |
| Housing Material – Pumps | Cast Iron |
| Motor Enclosure – Pumps | Open Dripproof |
| Motor Ambient Temp. Rating | 65 Degrees C |
| Max. Pressure | 158 psi |
| Housing Material | Cast iron |
| Motor Type | Capacitor-Start |
| Pump Mounting Position | Horizontal or Vertical with Inlet Down |
| Outlet | 3/4″ FNPT |
| GPM @ 10 PSI | 14 |
| Max. Liquid Temp. | 140 Degrees F |
| Stages | 12 |
| Impeller Material | Noryl |
| Voltage | 115/230 |
| Agency Compliance | CSA, CUS, UL Listed |
| Motor RPM | 3,450 RPM |
| GPM @ 100 PSI | 8.9 |
| GPM @ 20 PSI | 13.4 |
| HP | 3/4 |
| Impeller Type | Closed |
| Phase | Single |
| Bearing Type | Ball |
| Wetted Materials | Noryl,304 SS,CI,316 SS,Carbon,Ceramic,Buna N,BZ |
| GPM @ 40 PSI | 12.2 |
| Motor Enclosure | Open Dripproof (ODP) |
| Duty | Continuous |
| Amps | 14/7 A |
| Seal Material | Buna-N, Carbon, Ceramic, Stainless Steel |
| Includes | Kit, Vertical Motor Cover |
| Suction Lift | 0 ft |
| Inlet | 3/4″ FNPT |
| Frame | NEMA 56J |
| GPM @ 80 PSI | 9.5 |
| Hz | 60 |
| GPM @ 60 PSI | 10.9 |
| GPM @ 120 PSI | 7 |
| Max. Case Pressure | 300 psi |
| GPM @ 140 PSI | 4.6 |
| Standards | CSAus Certified |
| For Use With Potable Systems | No |
| Shut Off Pressure (Maximum) | 158 psi |
| Discharge Type | NPT |
| Compatible with Media Type | Clear Water Only |
| Flow Rate @ 80 psi | 9.5 gpm |
| Minimum Flow Rate | 1.5 gpm |
| Maximum Media Temperature | 140 Degrees F |
| Flow Rate @ 15 psi | 13.5 gpm |
| Flow Rate @ 50 psi | 11.5 gpm |
| Pumping Application | Booster Service, General Purpose, Jockey Pump, Pressure Cleaning, Reverse Osmosis, Spray or Mist Systems, Water Circulation |
| Flow Rate @ 100 psi | 7.9 gpm |
| Series | PB |
| Flow Rate @ 70 psi | 10.2 gpm |
| Flow Rate @ 120 psi | 6 gpm |
| Impeller Design | Closed |
| Number of Stages | 12 |
| Flow Rate @ 60 psi | 10.9 gpm |
| Duty Cycle | Continuous |
| Flow Rate @ 90 psi | 8.8 gpm |
| Intake Type | NPT |
| Flow Rate @ 40 psi | 12.2 gpm |
| Case Pressure (Maximum) | 300 psi |
| Flow Rate @ 10 psi | 14 gpm |
| Maximum Flow Rate | 41.5 gpm |
| Horsepower | 3/4 hp |
| Motor Ambient Temperature (Minimum) | 65 Degrees F |
| Mounting Orientation | Horizontal |
| Frequency | 60 Hz |
| Flow Rate @ 140 psi | 3.6 gpm |
| Motor Frame Designation | 56J NEMA |
| Pressure Boost (Maximum) | 216 psi |
| Suction Lift (Maximum) | 0 ft |
| Pump Housing Material | Cast Iron |
| Minimum Media Temperature | 34 Degrees F |
| Flow Rate @ 20 psi | 13.4 gpm |
| Priming | Manual |
| Thermal Overload Protection | Yes |
| Nameplate Voltage | 115/230V AC |
| Flow Rate @ 30 psi | 12.9 gpm |
| Wetted Material | 304 Stainless Steel, 316 Stainless Steel, Bronze, Buna-N, Cast Iron, Ceramic, Noryl |
| Motor Ambient Temperature (Maximum) | 149 Degrees F |
| Maximum RPM | 3,450 RPM |
Mfg. part #: PB0712a071
Reviews
There are no reviews yet.